The LTS stock is practically the same on the inside as a standard crane stock. However, the protruding part that is pointed downwards is hollow, so the stock offers a good bit of extra space! The end pieces of the side tubes are detachable so that it is easier to set the battery in. The hatch opens with hinges and locks in place. The stock has been designed so that when you press the length adjustment button, the locking pin gets pushed completely down and the stock can be directly slid off.
Manufacturer’s measurements for the sections:
The space offered by the buffer tube naturally depends on the tube in which the stock is installed.
The side tubes are 17 mm in diameter, length 118 mm. In addition, there is space for nickel battery wires in the upper edges.
The end section: height 75 mm, depth 25 mm and width 15 mm. Depending on the model of the battery, there might be some extra room.
The stock has been manufactured out of nylon and the small parts are steel. It weighs only 245 grams.